Versionshistoria madVR

<<Tillbaka

Förändringar v0.88.8 -> v0.88.10

• fixed: some problems when using NNEDI3
• slightly modified "high" debanding preset, once more

Förändringar v0.87.16 -> v0.87.19

• fixed: seeking sometimes froze (e.g. with Haali Splitter)
• fixed: DXVA scaling with "use a separate device for DXVA" -> black screen

Förändringar v0.87.13 -> v0.87.15

• changed DXVA scaling logic to produce proper quality with AMD drivers
• improved DXVA color space conversion performance
• new trade option "use DXVA chroma upscaling when doing native DXVA decoding"
• new trade option "use DXVA chroma upscaling when doing DXVA deinterlacing"
• new trade option "lose BTB and WTW if it improves performance"
• added scaling algorithm information to OSD
• added 3dlut split screen mode (can only be activated via key shortcut)
• added a few stability fixes/workarounds
• fixed: #033: display mode changer sometimes didn't switch to 75hz
• fixed: #176: no image on portrait (rotated) displays
• fixed: #199: decimation didn't work with 4:4 cadence (PAL 50p)
• fixed: #201: decimation didn't work with 4:2:2:2 cadence
• fixed: #203: cadence info sometimes went "unknown" in debug OSD
• fixed: #205: XySubFilter subtitles sometimes weren't visible
• fixed: #213: bad edit detection didn't work with 6:4 cadence (ATSC 60p)
• fixed: #222: crash when using a large number of shaders
• fixed: #227: Zoom Player OSD "pause" message sometimes wasn't shown
• fixed: #230: madVR refresh rate changer caused DVD playback to break
• fixed: #233: shared NVidia/AMD/Intel GPUs (e.g. Optimus) showed black screen
• fixed: #254: madVR 0.87.14 sometimes crashed when using XySubFilter
• fixed: #255: original system timer resolution wasn't restored on unload
• fixed: #257: OSD information sometimes shows "1.#J days"
• fixed: crash when decreasing GPU queue size
• removed software decoders
• removed trade option "don't use "copyback" for DXVA deinterlacing"
• removed trade option "don't use "copyback" for DXVA decoding"
• removed option "use OpenCL to process DXVA NV12 surfaces"
• removed option "use alternative interop hack (not recommended, AMD only)"
• removed option "use managed upload textures (XP only)"
• added support for ZoomPlayer's mouse scroll zoom functionality
• "Exclusive/Windowed" OSD messages don't overwrite other messages, anymore

Förändringar v0.87.10 -> v0.87.11

• fixed: AR downscaling after NNEDI3 luma only upscaling produced artifacts
• fixed: madTPG API "madVR_ConnectToIp(127.0.0.1)" sometimes didn't work
• madTPG: added API "Connect" with various options
• madTPG: added API "Quit" to close the connected madTPG instance
• madTPG: added APIs "Get/SetPatternConfig" & "ShowRGBEx"
• madTPG: added APIs "IsStayOnTopButtonPressed" & "SetStayOnTopButton"
• madTPG: added APIs "IsUseFullscreenButtonPressed" & "SetUseFullscreenButton"
• madTPG: added APIs "IsDisableOsdButtonPressed" & "SetDisableOsdButton"
• madTPG: added various new 3dlut conversion and loading APIs
• madTPG: added IP address information to title bar

Förändringar v0.87.9 -> v0.87.10

• added some optimizations to reduce AMD OpenCL interop cost
• added new windowed presentation path ("present several frames in advance")
• added support for decimating 50p/60p movies to 25p/24p
• added profile strings "filePath/Name/Ext", with wild char ("?", "*") support
• fixed: #181: profile auto switching sometimes invalidated file name tags
• fixed: #192: black flashing with Smooth Motion + NNEDI3 chroma doubling
• fixed: #193: image corruption when up&down scale is needed at the same time
• fixed: crash on Vista when trying to activate error diffusion
• fixed: Intel OpenCL CPU driver sometimes crashed
• OpenCL should now automatically prefer NVidia GPUs on Optimus laptops
• refresh rate hack is now only installed on Windows 8 (and newer)
• "Pause" OSD message no longer blocked
• file "madshi.net/madVR/version.txt" lists the current version number
• file "madshi.net/madVR/sha1.txt" lists SHA1 hash of the current "madVR.zip"

Förändringar v0.87.7 -> v0.87.8

• added workaround for NVidia OpenCL <-> D3D9 interop driver bug
• fixed: #158: NNEDI3 chroma upscaling + DXVA deint + NVidia -> green image
• fixed: DirectCompute rendering resources weren't properly released
• fixed: some multi monitor problems introduced in v0.87.7
• fixed: smooth motion frc sometimes incorrectly dropped frames
• fixed: toggling subtitle "trade quality" option required restart
• some DirectCompute stability improvements
• added vendor based OpenCL device filtering
• non-DX11-GPUs: error diffusion now falls back to ordered dithering
• improved Windows 8.1 FSE mode refresh rate hack

Förändringar v0.87.5 -> v0.87.7

• added linear light processing for ordered dithering and error diffusion
• added "trade quality for performance" option for linear light dithering
• fixed: #175: Banding appears if bitdepth is set to '7 bit'
• fixed: crash in MC19 when switching videos with native DXVA decoding
• fixed: rare overlay stability problems introduced in v0.87.5
• random dithering doesn't round down to less than 8bit, anymore
• "present several frames in advance = off" now auto-disables error diffusion
• display bitdepth can be be set to as low as 1bit (just for testing)
• added silent exception handling for Intel OpenCL initialization crashes
• madTPG now optionally supports APL windows (gamma and linear light)
• madTPG now has a minimum image area of 4% instead of 10%
• madTPG now draws a 20 pixel black border around the measurement area
• madTPG now properly supports dynamic dithering (didn't before)
• madTPG dithering was optimized to not dither for integer test patterns
• madTPG headers and demo projects updated
• madVR in a media player no longer supports test pattern, only madTPG does

Förändringar v0.87.4 -> v0.87.5

• error diffusion now uses DirectCompute (DX11 GPU needed) instead of OpenCL
• added fast and reasonably high quality "ordered dithering" algorithm
• added "rendering\dithering" settings page with many new options
• new default dithering is now ordered dithering instead of random dithering
• madTPG now always uses monochromatic ordered dithering
• fixed: #107: XySubFilter: reducing CPU queue size during playback -> crash
• fixed: #112: 120fps clip resulted in 23Hz being selected instead of 60Hz
• fixed: #119: installation resulted in "might not have installed correctly"
• fixed: #123: XySubFilter: Nearest Neighbor/Bilinear distorted subtitles
• fixed: #125: forced film mode with unsupported FOURCCs: graphical corruption
• fixed: #133: XySubFilter: opaque black box when smooth motion was enabled
• fixed: #136: when playback is stopped, madVR now always turns the video off
• fixed: #137: Nearest Neighbor/Bilinear has problems with post-resize shaders
• fixed: #138: smooth motion FRC flickered when using Nearest Neighbor
• fixed: #145: DCI-P3 was using an incorrect white point
• fixed: #155: screeshots sometimes had an added black border
• fixed: #159: speciying DCI-P3 as the calibrated gamut -> green screen
• fixed: #160: corruption with uncompressed 4096x2304 v210 in AVI
• fixed: #161: YUV 4:4:4 videos with weird resolutions crashed madVR
• fixed: #165: overlay mode restricted madVR to single player window
• fixed: #167: dithering produced dithering noise on pure black areas
• fixed: #169: dithering produced dithering noise on pure white areas
• fixed: #170: Overlay mode sometimes unnecessarily cleared GPU gamma ramps
• fixed: Overlay mode applied 3dlut and gamma ramps in wrong order
• fixed: crash reporting didn't catch exceptions in private threads, anymore
• fixed: crash when using XySubFilter with small GPU queue size
• fixed: DVD navigator was not released properly by madVR
• fixed: Run/Seek hooks also affected secondary DirectShow graphs
• fixed: profile key shortcuts only worked for "scaling" profiles
• fixed: full range YCbCr input produced slightly incorrect colors
• reduced Overlay mode graphical corruption when resizing media player
• exclusive -> windowed switch now shows a black frame instead of an old one
• removed XySubFilter auto-loading functionality, it's now XySubFilter's job
• disabled resolution based DCI-P3 auto detection
• changed default luma doubling value to 32 neurons
• display bitdepth can be be set to as low as 3bit (just for testing)

Förändringar v0.86.11 -> v0.87.0

• added debanding algorithm, based on improved version of "flash3kyuu_deband"
• added file name tag "deband=off|low|medium|high"
• added automatic detection for fades from/to black or white (for debanding)
• added support for using OpenCL with NVidia, AMD and Intel GPUs
• added DXVA surface splitting via OpenCL (only AMD and Intel GPUs)
• added error diffusion algorithm (requires OpenCL)
• added NNEDI3 chroma upsampling (requires OpenCL)
• added NNEDI3 image doubling/quadrupling (requires OpenCL)
• added flexible settings profile functionality
• added file name tag "profile='profile name'"
• added IMadVRSettings2 interface to enumerate settings and manage profiles
• settings can now be edited without madVR running (only on local PC)
• madNvLevelsTweaker -> madLevelsTweaker now also works for Intel GPUs
• madVR doesn't dither, anymore, when a pixel doesn't need dithering
• added Intel driver bug workaround for "use separate device for presentation"
• added madHcNet64.dll to allow madTPG automation from 64bit calibration tools
• added API for asking madVR about the output levels (TV, PC, custom)
• fixed: full backbuffer queue slowed rendering down
• fixed: madTPG sometimes didn't update to newly requested test pattern color
• fixed: madTPG dithering produced blocking artifacts
• fixed: when upscaling exactly 2x, AR filter wasn't active for blue channel
• fixed: ArgyllCMS/HCFR disabling the 3dlut didn't work
• fixed: LAV Video Decoder sending v210 produced corrupted image
• improved frame cropping support
• improved windowproc hook stability
• a couple of very small pixel shader performance improvements
• optimized madVR default settings
• improved madVR tray icon menu looks on newer OSs
• tags now require "tag=value" or "tag:value"; "tag value" no longer accepted
• disabled automatic DCI-P3 detection through 2048 video width

Förändringar v0.86.8 -> v0.86.9

• fixed: madHcCtrl.exe had the wrong exe icon
• using linear light is now default for smooth motion FRC
• added new trade quality option "optimize subtitle quality for performance"
• modified the time when display mode is restored when media player closes
• win8 FSE refresh rate fix is now also applied without display mode changer
• added API to allow more control over test pattern progress bar
• cleaned up 3dlut and VideoLUT disable/define priorities
• improved support for combined 3dlut/VideoLUT file format ("collink -H")

Förändringar v0.86.7 -> v0.86.8

• fixed: entering FSE mode sometimes caused a delay (introduced in v0.86.7)
• added support for specifying a separate external 3dlut for each source gamut
• gamut conversion is now skipped if the 3dlut gamut matches the source gamut
• madTPG: screensaver is blocked (except if it is passworded!)
• madTPG: screen is prevented from going to sleep
• madTPG: added "stay on top" button
• madTPG: changed the way the "fullscreen" button works
• madTPG: window size/state and all settings are auto saved now
• madTPG: now works without requiring madVR to be installed
• madTPG: fixed: crash when madVR was not installed

Förändringar v0.86.6 -> v0.86.7

• added "madTPG.exe" test pattern generator for calibration purposes
• added support for combined 3dlut/VideoLUT file format ("collink -H")
• option "Disable GPU gamma ramps" should now work in windowed mode, too
• fixed: #30: ZoomPlayer got stuck in 'on top' mode after leaving FSE
• fixed: #90: wrong refresh rate (23/24, 59/60) in win8 in FSE mode
• fixed: #91: added madVR version information to settings dialog
• fixed: #92: shaders were not applied to XySubFilter subtitles
• fixed: #93: overlay mode ignored ICC VideoLUTs
• fixed: pixel shader VideoLUT implementation didn't use linear filtering
• fixed: crash when display mode is changed externally (DXVA processing)
• XySubFilter: improved subtitle upload performance
• XySubFilter: optimized downscaling of bitmap based subtitles
• XySubFilter: madVR consumer now reports "preferTvLevels = true"
• XySubFilter: improved performance, if provider sends TV levels subtitles

Förändringar v0.86.5 -> v0.86.6

• added smooth motion frame rate conversion algorithm
• added settings page for smooth motion frc configuration
• added "trade quality for performance" option for smooth motion frc
• added test patterns to madTestPatternSource to test smooth motion frc
• added support for drawing remote controlled calibration test patterns
• added support for DCI-P3 and BT.2020 primaries and BT.2020 matrix
• added support for "matrix=2020" and "primaries=2020|DCI" tags
• added resolution based auto detection for DCI-P3
• added explicit detection for non PS3.0 capable GPUs
• added IMadVRInfo interface which makes all sorts of info available
• fixed: RGB input with odd width/height is now accepted untouched
• fixed: IVideoWindow::put_Owner() failed when pins were not connected yet
• fixed: madHcCtrl.exe autostart registry entry was incorrect / not working
• fixed: occasional crash when using DXVA scaling with high-bitdepth content
• fixed: green line at the left image border when using DXVA scaling
• fixed: refresh rate changing didn't always work correctly in Windows 8
• fixed: MPC-BE title bar didn't handle unicode characters correctly
• fixed: ZoomPlayer: cosmetical issue when pausing in FSE mode
• fixed: #18: decoder queue sometimes exceeded limits
• fixed: #23: video didn't follow overlay window position when paused
• fixed: #35: framerate tag was not working
• fixed: #37: when no video duration was known, seekbar was not shown
• fixed: #42: memory leak with certain OSD elements
• fixed: #44: GraphStudioNext "Performance Test" Crash
• fixed: #46: XySubFilter: 3DLUT was not applied to frames with subtitles
• fixed: #47: XySubFilter: subtitles weren't rerendered after scaling change
• fixed: #48: XySubFilter: incorrect positioning after downscaling
• fixed: #49: XySubFilter: incorrect PGS subtitle positions
• fixed: #50: XySubFilter: smooth motion FRC caused subtitles flicker
• fixed: #51: settings dialog now mentions both ReClock and VideoClock
• fixed: #52: XySubFilter: incorrect ASS subtitle positions
• fixed: #55: FSE seek bar resulted in inaccurate seeking for DVDs
• fixed: #62: crash when external 3dlut file with long filename was missing
• fixed: #65: film refresh rate was used with dxva decoding -> deinterlacing
• fixed: #66: Cineform decoder v210 (10-bit 4:2:2) corruption
• fixed: #72: display mode restauration didn't work correctly in win8
• fixed: #73: display mode was not restored when playback was stopped in MC18
• fixed: #74: fullscreen <-> windowed can be slow with large CPU queue
• fixed: #79: XySubFilter: non-color-corrected subtitles had wrong levels
• fixed: #81: Repeated frames count increases when video is paused
• increased max CPU queue size to 128 frames
• renamed madHcNet.dll to madHcNet32.dll
• file "settings.bin" is not written into win7/8 "VirtualStore", anymore
• tray icon appears faster now
• slightly improved multi monitor behaviour (when using DXVA or MPC-BE)
• improved exclusive mode presentation timing with jittery audio clock a bit
• filter enumeration timer is now only active during DVD playback
• extended logging for fullscreen exclusive presentation queue
• internal software video decoders are now disabled by default (again)

Förändringar v0.86.3 -> v0.86.4

• added smooth motion frame rate conversion algorithm
• added settings page for smooth motion frc configuration
• added "trade quality for performance" option for smooth motion frc
• added test patterns to madTestPatternSource to test smooth motion frc
• added support for drawing remote controlled calibration test patterns
• added support for DCI-P3 and BT.2020 primaries and BT.2020 matrix
• added support for "matrix=2020" and "primaries=2020|DCI" tags
• added resolution based auto detection for DCI-P3
• added explicit detection for non PS3.0 capable GPUs
• added IMadVRInfo interface which makes all sorts of info available
• fixed: RGB input with odd width/height is now accepted untouched
• fixed: IVideoWindow::put_Owner() failed when pins were not connected yet
• fixed: madHcCtrl.exe autostart registry entry was incorrect / not working
• fixed: occasional crash when using DXVA scaling with high-bitdepth content
• fixed: green line at the left image border when using DXVA scaling
• fixed: refresh rate changing didn't always work correctly in Windows 8
• fixed: MPC-BE title bar didn't handle unicode characters correctly
• fixed: ZoomPlayer: cosmetical issue when pausing in FSE mode
• fixed: #18: decoder queue sometimes exceeded limits
• fixed: #23: video didn't follow overlay window position when paused
• fixed: #35: framerate tag was not working
• fixed: #37: when no video duration was known, seekbar was not shown
• fixed: #42: memory leak with certain OSD elements
• fixed: #44: GraphStudioNext "Performance Test" Crash
• fixed: #46: XySubFilter: 3DLUT was not applied to frames with subtitles
• fixed: #47: XySubFilter: subtitles weren't rerendered after scaling change
• fixed: #48: XySubFilter: incorrect positioning after downscaling
• fixed: #49: XySubFilter: incorrect PGS subtitle positions
• fixed: #50: XySubFilter: smooth motion FRC caused subtitles flicker
• fixed: #51: settings dialog now mentions both ReClock and VideoClock
• fixed: #52: XySubFilter: incorrect ASS subtitle positions
• fixed: #55: FSE seek bar resulted in inaccurate seeking for DVDs
• fixed: #62: crash when external 3dlut file with long filename was missing
• fixed: #65: film refresh rate was used with dxva decoding -> deinterlacing
• fixed: #66: Cineform decoder v210 (10-bit 4:2:2) corruption
• fixed: #72: display mode restauration didn't work correctly in win8
• fixed: #73: display mode was not restored when playback was stopped in MC18
• fixed: #74: fullscreen <-> windowed can be slow with large CPU queue
• fixed: #79: XySubFilter: non-color-corrected subtitles had wrong levels
• fixed: #81: Repeated frames count increases when video is paused
• increased max CPU queue size to 128 frames
• renamed madHcNet.dll to madHcNet32.dll
• file "settings.bin" is not written into win7/8 "VirtualStore", anymore
• tray icon appears faster now
• slightly improved multi monitor behaviour (when using DXVA or MPC-BE)
• improved exclusive mode presentation timing with jittery audio clock a bit
• filter enumeration timer is now only active during DVD playback
• extended logging for fullscreen exclusive presentation queue
• internal software video decoders are now disabled by default (again)

Förändringar v0.85.7 -> v0.85.8

• added support for external DXVA2 decoders
• added support for DXVA2 scaling
• added support for custom pixel shaders (pre- and post-scaling)
• added support for media player color controls (IVMRMixerControl9)
• added support for "IQualProp" interface for media player statistics display
• added (crappy) support for high-bitdepth, 4:2:2 and 4:4:4 DXVA2 deinterlacing
• added dithering to 10/16bit -> NV12 conversion routines
• added SSE2 routine for P010/P016/P210/P216 -> NV12 conversion
• added options for custom display output levels
• added display specific color controls
• added volatile source color controls, with keyboard shortcuts
• added color correction and auto-loading for new subtitle interface
• added auto correction if FPS upstream info is wrong by 2x or 0.5x factor
• added support for IVideoWindow::put_BorderColor()
• added double/triple expanded TV range to "source levels" toggle
• added a couple "trade quality for performance" options
• added support for several new file name tags
• added "repeated frames" OSD info (only when framerate = refresh rate)
• up to 56% speed improvement for Jinc3 chroma upscaling
• up to 40% speed improvement for Jinc3 AR chroma upscaling
• up to 53% speed impr. for Jinc3/4 image upscaling with 2x scaling factor
• up to 47% speed impr. for Jinc3/4 AR image upscaling with 2x scaling factor
• up to 39% speed impr. for non-Jinc image upscaling with 2x scaling factor
• up to 27% speed impr. for non-Jinc AR image upscaling with 2x scaling factor
• up to 44% speed impr. for non-Jinc image upscaling with 3x scaling factor

Förändringar v0.85.6.1 -> v0.85.7

• added support for external DXVA2 decoders
• added support for DXVA2 scaling
• added support for custom pixel shaders (pre- and post-scaling)
• added support for media player color controls (IVMRMixerControl9)
• added support for "IQualProp" interface for media player statistics display
• added (crappy) support for high-bitdepth, 4:2:2 and 4:4:4 DXVA2 deinterlacing
• added dithering to 10/16bit -> NV12 conversion routines
• added SSE2 routine for P010/P016/P210/P216 -> NV12 conversion
• added options for custom display output levels
• added display specific color controls
• added volatile source color controls, with keyboard shortcuts
• added color correction and auto-loading for new subtitle interface
• added auto correction if FPS upstream info is wrong by 2x or 0.5x factor
• added support for IVideoWindow::put_BorderColor()
• added double/triple expanded TV range to "source levels" toggle
• added a couple "trade quality for performance" options
• added support for several new file name tags
• up to 56% speed improvement for Jinc3 chroma upscaling
• up to 40% speed improvement for Jinc3 AR chroma upscaling
• up to 53% speed impr. for Jinc3/4 image upscaling with 2x scaling factor
• up to 47% speed impr. for Jinc3/4 AR image upscaling with 2x scaling factor
• up to 39% speed impr. for non-Jinc image upscaling with 2x scaling factor
• up to 27% speed impr. for non-Jinc AR image upscaling with 2x scaling factor
• up to 44% speed impr. for non-Jinc image upscaling with 3x scaling factor

Förändringar v0.85.2 -> v0.85.4

• added support for external DXVA2 decoders
• added support for DXVA2 scaling
• added support for custom pixel shaders (pre- and post-scaling)
• added support for media player color controls (IVMRMixerControl9)
• added support for "IQualProp" interface for media player statistics display
• added (crappy) support for high-bitdepth, 4:2:2 and 4:4:4 DXVA2 deinterlacing
• added dithering to 10/16bit -> NV12 conversion routines
• added SSE2 routine for P010/P016/P210/P216 -> NV12 conversion
• added options for custom display output levels
• added display specific color controls
• added volatile source color controls, with keyboard shortcuts
• added color correction and auto-loading for new subtitle interface
• added auto correction if FPS upstream info is wrong by 2x or 0.5x factor
• added support for IVideoWindow::put_BorderColor()
• added double/triple expanded TV range to "source levels" toggle
• added "trade quality" option "use half frame rate for DXVA deinterlacing"
• added support for several new file name tags

Förändringar v0.85.1 -> v0.85.2

• added support for external DXVA2 decoders
• added support for DXVA2 scaling
• added support for custom pixel shaders (pre- and post-scaling)
• added support for media player color controls (IVMRMixerControl9)
• added support for "IQualProp" interface for media player statistics display
• added (crappy) support for high-bitdepth, 4:2:2 and 4:4:4 DXVA2 deinterlacing
• added dithering to 10/16bit -> NV12 conversion routines
• added SSE2 routine for P010/P016/P210/P216 -> NV12 conversion
• added options for custom display output levels
• added display specific color controls
• added volatile source color controls, with keyboard shortcuts
• added color correction and auto-loading for new subtitle interface

Förändringar v0.84.7 -> v0.85.1

• added support for external DXVA2 decoders
• added support for DXVA2 scaling
• added support for custom pixel shaders (pre- and post-scaling)
• added support for media player color controls (IVMRMixerControl9)
• added support for "IQualProp" interface for media player statistics display
• added (crappy) support for high-bitdepth, 4:2:2 and 4:4:4 DXVA2 deinterlacing
• changed default scaling settings

Förändringar v0.84.7 -> v0.85.0

• added support for external DXVA2 decoders
• added support for DXVA2 scaling
• added support for custom pixel shaders (pre- and post-scaling)
• added support for media player color controls (IVMRMixerControl9)
• added support for "IQualProp" interface for media player statistics display
• added (crappy) support for high-bitdepth, 4:2:2 and 4:4:4 DXVA2 deinterlacing
• changed default scaling settings

Förändringar v0.84.3 -> v0.84.7

• fixed: DVD playback often resulted in Macrovision errors
• improved Jinc AR algorithm for clean computer type images/videos
• added support for new subtitle interface (e.g. for future xy-vsfilter build)
• fixed: encrypted DVDs didn't play
• fixed: DVD menu "clickable areas" were not always located correctly
• fixed: DVD menu buttons near the FSE seekbar didn't work
• fixed: some minor cosmetical improvements to DVD menu rendering
• fixed: seeking DVDs in fullscreen exclusive mode didn't flush the decoder
• fixed: frame stepping should now work perfectly
• fixed: MPC-HC froze when creating thumbnails
• fixed: MPC-HC froze when seeking DVDs in Windows XP
• fixed: scaling settings were not always remembered after "restore default"
• 50i and 50p SD sources are now auto detected as having PAL/EBU primaries

Förändringar v0.84.2 -> v0.84.3

• added media player screenshot functionality (IBasicVideo::GetCurrentImage)
• added "Jinc" image upscaling algorithm
• added anti-ringing filter for downscaling
• added "user interface\keyboard shortcuts" settings page
• added option to apply keys "only if media player has keyboard focus"
• added options to adjust the keys for all existing keyboard shortcuts
• added shortcut option for directly selecting specific source primaries
• added shortcut option for directly selecting specific deint content types
• added shortcut option for en/disabling automatic fullscreen exclusive mode
• added shortcut option for disabling exclusive mode for 10 seconds
• added shortcut option for en/disabling the display mode switcher
• added shortcut option for en/disabling dithering
• added shortcut option for changing the display bitdepth
• added various shortcut options for selecting scaling algorithms
• added IMadVRExclusiveModeCallback interface for exclusive mode notifications
• renamed "luma up/downscaling" to "image up/downscaling"
• renamed "use 10bit luma buffer ..." to "use 10bit image buffer ..."
• scaling algorithm parameters (softness, sharpness, taps) are remembered now
• scaling algorithm red/green graphs (settings dialog) now cover anti-ringing
• modified shader storage to decrease madVR.ax file size
• fixed: KMPlayer + madVR decoders + "delay playback start" was always paused
• fixed: settings dialog had problems with yCMS data when using Overlay mode
• fixed: cosmetical issue in fullscreen windowed mode when changing video files

Förändringar v0.84.0 -> v0.84.2

• added media player screenshot functionality (IBasicVideo::GetCurrentImage)
• added "Jinc" image upscaling algorithm
• added anti-ringing filter for downscaling
• added "user interface\keyboard shortcuts" settings page
• added option to apply keys "only if media player has keyboard focus"
• added options to adjust the keys for all existing keyboard shortcuts
• added shortcut option for directly selecting specific source primaries
• added shortcut option for directly selecting specific deint content types
• added shortcut option for en/disabling automatic fullscreen exclusive mode
• added shortcut option for disabling exclusive mode for 10 seconds
• added shortcut option for en/disabling the display mode switcher
• added shortcut option for en/disabling dithering
• added shortcut option for changing the display bitdepth
• added various shortcut options for selecting scaling algorithms
• added IMadVRExclusiveModeCallback interface for exclusive mode notifications
• renamed "luma up/downscaling" to "image up/downscaling"
• renamed "use 10bit luma buffer ..." to "use 10bit image buffer ..."
• scaling algorithm parameters (softness, sharpness, taps) are remembered now
• scaling algorithm red/green graphs (settings dialog) now cover anti-ringing
• modified shader storage to decrease madVR.ax file size
• fixed: KMPlayer + madVR decoders + "delay playback start" was always paused
• fixed: settings dialog had problems with yCMS data when using Overlay mode
• fixed: cosmetical issue in fullscreen windowed mode when changing video files

Förändringar v0.83.7 -> v0.84.0

• added media player screenshot functionality (IBasicVideo::GetCurrentImage)
• added "Jinc" image upscaling algorithm
• added anti-ringing filter for downscaling
• added "user interface\keyboard shortcuts" settings page
• added option to apply keys "only if media player has keyboard focus"
• added options to adjust the keys for all existing keyboard shortcuts
• added shortcut option for directly selecting specific source primaries
• added shortcut option for directly selecting specific deint content types
• added shortcut option for en/disabling automatic fullscreen exclusive mode
• added shortcut option for disabling exclusive mode for 10 seconds
• added shortcut option for en/disabling the display mode switcher
• added shortcut option for en/disabling dithering
• added shortcut option for changing the display bitdepth
• added various shortcut options for selecting scaling algorithms
• added IMadVRExclusiveModeCallback interface for exclusive mode notifications
• renamed "luma up/downscaling" to "image up/downscaling"
• renamed "use 10bit luma buffer ..." to "use 10bit image buffer ..."
• scaling algorithm parameters (softness, sharpness, taps) are remembered now
• scaling algorithm red/green graphs (settings dialog) now cover anti-ringing
• modified shader storage to decrease madVR.ax file size
• fixed: KMPlayer + madVR decoders + "delay playback start" was always paused
• fixed: settings dialog had problems with yCMS data when using Overlay mode
• fixed: cosmetical issue in fullscreen windowed mode when changing video files

Förändringar v0.83.6 -> v0.83.7

• added "enable windowed overlay (Windows 7 and newer)" option
• added "anti-ringing" option for chroma and luma scaling
• added extra "delay playback start after seeking, too" option
• added new calibration option "disable GPU gamma ramps"
• doubled exclusive mode seekbar in size
• added position / runtime information to exclusive mode seekbar
• removed some tweak options (rendered superfluous by new WHQL NVidia driver)
• madVR window is now created and served by a separate thread
• Windows timer/scheduler is now always set to finest possible resolution
• modified DXVA deinterlacing to work a bit more similar to EVR
• AVI Decompressor output is now always considered to be decompressed video
• added workaround to hide kmplayer crash when resizing video
• fixed: crash when multiple madVR instances are created at the same time
• fixed: freeing madVR instance sometimes resulted in a crash
• fixed: VSFilter passes RGB -> input was incorrectly considered limited range
• fixed: bilinear chroma upsampling used MPEG1 chroma position instead of MPEG2
• fixed: switching deinterlacing mode -> "resetting Direct3D device failed"
• fixed: crash when playing certain video files with AVSplitter

Förändringar v0.83.5 -> v0.83.6

• added "enable windowed overlay (Windows 7 and newer)" option
• added "anti-ringing" option for chroma and luma scaling
• added extra "delay playback start after seeking, too" option
• added new calibration option "disable GPU gamma ramps"
• doubled exclusive mode seekbar in size
• added position / runtime information to exclusive mode seekbar
• removed some tweak options (rendered superfluous by new WHQL NVidia driver)
• madVR window is now created and served by a separate thread
• Windows timer/scheduler is now always set to finest possible resolution
• modified DXVA deinterlacing to work a bit more similar to EVR
• AVI Decompressor output is now always considered to be decompressed video
• added workaround to hide kmplayer crash when resizing video
• fixed: crash when multiple madVR instances are created at the same time
• fixed: freeing madVR instance sometimes resulted in a crash
• fixed: VSFilter passes RGB -> input was incorrectly considered limited range
• fixed: bilinear chroma upsampling used MPEG1 chroma position instead of MPEG2
• fixed: switching deinterlacing mode -> "resetting Direct3D device failed"
• fixed: crash when playing certain video files with AVSplitter

Förändringar v0.83.4 -> v0.83.5

• added "enable windowed overlay (Windows 7 and newer)" option
• added "anti-ringing" option for chroma and luma scaling
• added extra "delay playback start after seeking, too" option
• added new calibration option "disable GPU gamma ramps"
• doubled exclusive mode seekbar in size
• added position / runtime information to exclusive mode seekbar
• removed some tweak options (rendered superfluous by new WHQL NVidia driver)
• madVR window is now created and served by a separate thread
• Windows timer/scheduler is now always set to finest possible resolution
• modified DXVA deinterlacing to work a bit more similar to EVR
• AVI Decompressor output is now always considered to be decompressed video
• added workaround to hide kmplayer crash when resizing video
• fixed: crash when multiple madVR instances are created at the same time
• fixed: freeing madVR instance sometimes resulted in a crash
• fixed: VSFilter passes RGB -> input was incorrectly considered limited range
• fixed: bilinear chroma upsampling used MPEG1 chroma position instead of MPEG2
• fixed: switching deinterlacing mode -> "resetting Direct3D device failed"
• fixed: crash when playing certain video files with AVSplitter

Förändringar v0.83.2 -> v0.83.4

• added "enable windowed overlay (Windows 7 and newer)" option
• added "anti-ringing" option for chroma and luma scaling
• added extra "delay playback start after seeking, too" option
• added new calibration option "disable GPU gamma ramps"
• doubled exclusive mode seekbar in size
• added position / runtime information to exclusive mode seekbar
• removed some tweak options (rendered superfluous by new WHQL NVidia driver)
• madVR window is now created and served by a separate thread
• Windows timer/scheduler is now always set to finest possible resolution
• modified DXVA deinterlacing to work a bit more similar to EVR
• AVI Decompressor output is now always considered to be decompressed video
• added workaround to hide kmplayer crash when resizing video
• fixed: crash when multiple madVR instances are created at the same time
• fixed: freeing madVR instance sometimes resulted in a crash
• fixed: VSFilter passes RGB -> input was incorrectly considered limited range
• fixed: bilinear chroma upsampling used MPEG1 chroma position instead of MPEG2
• fixed: switching deinterlacing mode -> "resetting Direct3D device failed"
• fixed: crash when playing certain video files with AVSplitter

Förändringar v0.82.5 -> v0.83.2

• added "enable windowed overlay (Windows 7 and newer)" option
• added "anti-ringing" option for chroma and luma scaling
• added extra "delay playback start after seeking, too" option
• added new calibration option "disable GPU gamma ramps"
• doubled exclusive mode seekbar in size
• added position / runtime information to exclusive mode seekbar
• removed some tweak options (rendered superfluous by new WHQL NVidia driver)
• madVR window is now created and served by a separate thread
• Windows timer/scheduler is now always set to finest possible resolution
• modified DXVA deinterlacing to work a bit more similar to EVR
• AVI Decompressor output is now always considered to be decompressed video
• added workaround to hide kmplayer crash when resizing video
• fixed: crash when multiple madVR instances are created at the same time
• fixed: freeing madVR instance sometimes resulted in a crash
• fixed: VSFilter passes RGB -> input was incorrectly considered limited range
• fixed: bilinear chroma upsampling used MPEG1 chroma position instead of MPEG2
• fixed: switching deinterlacing mode -> "resetting Direct3D device failed"
• fixed: crash when playing certain video files with AVSplitter

Förändringar v0.82.4 -> v0.82.5

• added: new option to activate deinterlacing if in doubt whether it's needed
• added: new IVTC option to only look at pixels in the frame center
• added: IVTC "cadence breaks" information to OSD; resets with Ctrl+R, as usual
• deinterlacing + IVTC are now always forced on for 60i sources tagged as 24Hz
• improved IVTC cadence logic
• improved DXVA deinterlacing behaviour slightly
• improved display mode change event handling
• improved exclusive -> windowed switch a little bit more
• lots of fixes

Förändringar v0.82.3 -> v0.82.4

• added: new option to activate deinterlacing if in doubt whether it's needed
• added: new IVTC option to only look at pixels in the frame center
• added: IVTC "cadence breaks" information to OSD; resets with Ctrl+R, as usual
• deinterlacing + IVTC are now always forced on for 60i sources tagged as 24Hz
• improved IVTC cadence logic
• improved DXVA deinterlacing behaviour slightly
• improved display mode change event handling
• improved exclusive -> windowed switch a little bit more
• fixed: madVR sometimes didn't notice changed display mode
• fixed: if DXVA2 deinterlacing was not available in XP, it made madVR crash
• fixed: crash when moving madVR to another display with ZoomPlayer
• fixed: freeze when switching subtitles in paused state
• fixed: closing down madVR didn't always wait for the closing to complete
• fixed: closing the media player while madVR was in exclusive mode -> freeze
• fixed: sometimes asking for a freeze report created multiple reports at once
• fixed: MS DVD Navigator caused error in the primaries/matrix auto detection
• fixed: when switching from Bicubic to SoftCubic, options weren't updated
• fixed: red error messages were supposed to disappear after a while but didn't
• fixed: red error messages no longer show duplicate error messages
• fixed: a couple of crashes and freezes

Förändringar v0.81 -> v0.82.3

• added: new option to activate deinterlacing if in doubt whether it's needed
• added: new IVTC option to only look at pixels in the frame center
• added: IVTC "cadence breaks" information to OSD; resets with Ctrl+R, as usual
• deinterlacing + IVTC are now always forced on for 60i sources tagged as 24Hz
• improved IVTC cadence logic
• improved DXVA deinterlacing behaviour slightly
• improved display mode change event handling
• improved exclusive -> windowed switch a little bit more
• fixed: madVR sometimes didn't notice changed display mode
• fixed: if DXVA2 deinterlacing was not available in XP, it made madVR crash
• fixed: crash when moving madVR to another display with ZoomPlayer
• fixed: freeze when switching subtitles in paused state
• fixed: closing down madVR didn't always wait for the closing to complete
• fixed: closing the media player while madVR was in exclusive mode -> freeze
• fixed: sometimes asking for a freeze report created multiple reports at once
• fixed: MS DVD Navigator caused error in the primaries/matrix auto detection
• fixed: when switching from Bicubic to SoftCubic, options weren't updated
• fixed: red error messages were supposed to disappear after a while but didn't
• fixed: red error messages no longer show duplicate error messages

Förändringar v0.81 -> v0.82.1

• added: new option to activate deinterlacing if in doubt whether it's needed
• added: new IVTC option to only look at pixels in the frame center
• added: IVTC "cadence breaks" information to OSD; resets with Ctrl+R, as usual
• deinterlacing + IVTC are now always forced on for 60i sources tagged as 24Hz
• improved IVTC cadence logic
• improved DXVA deinterlacing behaviour slightly
• improved display mode change event handling
• improved exclusive -> windowed switch a little bit more
• fixed: madVR sometimes didn't notice changed display mode
• fixed: if DXVA2 deinterlacing was not available in XP, it made madVR crash
• fixed: crash when moving madVR to another display with ZoomPlayer
• fixed: freeze when switching subtitles in paused state
• fixed: closing down madVR didn't always wait for the closing to complete
• fixed: closing the media player while madVR was in exclusive mode -> freeze
• fixed: sometimes asking for a freeze report created multiple reports at once
• fixed: MS DVD Navigator caused error in the primaries/matrix auto detection
• fixed: when switching from Bicubic to SoftCubic, options weren't updated
• fixed: red error messages were supposed to disappear after a while but didn't
• fixed: red error messages no longer show duplicate error messages

Förändringar v0.80 -> v0.81

• added automatic exception catching functionality
• added manual freeze report functionality (press Ctrl+Alt+Shift+Break)
• added option to switch display mode only when media player is in fullscreen
• added option to restore display mode when media player leaves fullscreen
• display mode changer now reacts on film (24p) vs. video (60p) content type
• improved renderer behaviour when display mode changes
• improved ivtc: faster detection of cadence changes
• improved ivtc: more robust against compression artifacts
• deint + ivtc is now auto activated for 60i movies which are tagged to 24 Hz
• ivtc is now auto activated for 50i movies which are tagged to 25 or 24 Hz
• deinterlacing is only turned on for 50i and 60i movies now
• added patch to MS VC-1 decoder -> deinterlacing off
• modified file name tagging logic (24p, 24i, 24fps, 24Hz, etc)
• improved behaviour with decoders which don't output proper interlaced flags
• improved exclusive -> windowed mode behaviour slightly, mainly for ZoomPlayer
• added "sharpness: 100" option for Bicubic scaling
• queue sizes are now always 16/8 by default, no more automatic adjustments
• keyboard shortcuts: always only change things temporarily by default now
• keyboard shortcuts: some changes (not all) can be stored by pressing F2 now
• the source levels (TV vs PC) can be stored now
• the source content type (film vs video) can be stored now
• key presses are now only "swallowed" if media player process has key focus
• osd keyboard handling runs in its own thread now
• added many more languages to the "Pause" MPC-HC message block
• used GPU RAM is now not shown in osd, anymore
• increased upload thread priority slightly
• fixed: ZoomPlayer eventually froze when leaving exclusive mode
• fixed: some users had composition rate in exclusive mode OSD -> problems
• fixed: crash when video window size was reduced to a very small size
• fixed: frame stepping sometimes resulted in weird play/pause mixed state
• fixed: one case where "delay playback start..." resulted in paused state
• fixed: v210 pitch/stride handling was broken
• fixed: YV24 had swapped chroma channels
• fixed: YV24 DXVA deinterlacing resulted in image corruption
• fixed: OSD API didn't capture mouse events on mouse down

Förändringar v0.79 -> v0.80

• added IVTC algo with decimation and support for 3:2, PAL and Anime cadences
• Ctrl+Alt+Shift+T switches between video (DXVA) and film (IVTC) content type
• fixed: moving media player to another monitor made DXVA deinterlacing crash
• fixed: DXVA deinterlacing produced wrong colors (only with HD videos + ATI)
• fixed: after a refresh rate change the composition rate didn't update
• fixed: calculation of consumed GPU RAM was wrong
• fixed: minimizing ZoomPlayer with playing video made some problems
• fixed: v0.79 didn't always detect external refresh rate changes
• fixed: some h264 AVI files made madVR crash, depending on the splitter
• fixed: improved internal decoder MPEG2 timestamp handling
• fixed: zooming video extremely small made madVR close the media player
• fixed: video was positioned wrong when media player cropped top/left
• fixed: a couple of small Direct3D related bugs
• fixed: a little resource leak
• improved presentation timestamp correction a bit
• improved "IMadVRExclusiveModeInfo::IsExclusiveModeActive"
• improved "IMadVRExclusiveModeControl::DisableExclusiveMode"
• added window size checks to detect to-be-expected exlusive mode failures
• added new interface "IMadVRDirect3D9Manager" for XBMC (work in progress)
• modified automatic queue sizes
• improved logging during media player shutdown

Förändringar v0.78 -> v0.79

• modified deinterlacing logic to save GPU RAM
• added resource manager to save GPU RAM and a little bit of GPU performance
• added information about used / total GPU RAM to debug OSD (Ctrl+J)
• added new options to choose decoder and GPU queue sizes
• added automatic adjustment of queue sizes, based on GPU RAM size
• corrected queue sizes with deinterlacing turned on (size 1 too high in v0.78)
• improved deinterlacing quality at the start of playback and after seeks
• improved the way madVR calls DXVA2 (now more similar to EVR)
• moved some eventually CPU intensive code from render to separate thread
• optimized performance of DXVA2->PixelShader texture conversion for some GPUs
• optimized internal libav decoder format conversion logic
• movie frame rate overwrite via file name now also set deinterlacing on/off
• option "perform deinterlacing in separate thread" is now "on" by default
• MPC-HC OSD text "Pausa" is now blocked (to avoid disappearing subtitles)
• fixed: source cropping (J.River MC) could result in corrupted chroma channel
• fixed: IMediaSample allocator wasn't fit for decoder queue size of 12 frames

Förändringar v0.77 -> v0.78

• added support for DXVA2 deinterlacing
• added option to enable/disable automatic activation of deinterlacing
• added option to force off deinterlacing for 48i sources
• added option enable/disable performing deinterlacing in a separate thread
• added auto 4:2:2/4:4:4 to 4:2:0 conversion when using DXVA2 deinterlacing
• added OSD deinterlacing information
• Ctrl+Alt+Shift+D turns deinterlacing on/off
• Ctrl+Alt+Shift+F switches deinterlacing field order (auto, top, bottom first)
• changed gamma decrease key combo from Ctrl+Alt+Shift+F to Ctrl+Alt+Shift+B
• increased decoder queue size to 12 frames
• added support for h264 10bit 4:2:2 decoding
• improved frame stepping
• improved internal frame locking mechanism
• removed warning "creating 10bit render texture failed, used 8bit instead"
• updated libav/ffmpeg dlls

Förändringar v0.76 -> v0.77

• added support for ffmpeg/libav h264 4:2:2 decoding
• optimized ffmpeg/libav compiling options
• fixed: madVR disliked getting 2 frames with identical timecodes all the time
• modified autodetect priorities slightly

Förändringar v0.74 -> v0.75

• fixed: v0.74 stopped decoder DirectShow filter from being released properly
• fixed: PotPlayer sometimes crashed when switching video files
• fixed: internal decoders made problems with cropped MKVs & Haali Splitter
• fixed: OSD sometimes didn't appear in ZoomPlayer in exclusive mode
• fixed: VP70 decoder showed video upside down
• fixed: RGB24 input sometimes crashed madVR
• fixed: ffdshow RGB input level detection sometimes failed
• subtitles run through the 3dlut now, too
• internal decoders are now auto disabled if required decoder dlls are missing
• added option to scale Luma in linear light, disabled by default
• RGB input with unknown range is now treated by default as full range
• added detailed information about matrix, primaries and levels to debug OSD
• updated libav/ffmpeg dlls

Förändringar v0.73 -> v0.74

• fixed: internal decoder showed 10bit video with non-mod-4 width distorted
• fixed: primaries/matrix auto detection eventually failed if ffdshow upscaled
• fixed: MPEG2 internal decoder timestamps didn't work well with DVDs/VOBs
• fixed: ZoomPlayer "Media: Next Track" -> OSD "windowed" stayed forever
• fixed: corruption with ordered chapters, when using internal decoders
• added new interface "IMadVRExclusiveModeControl"
• added new interface "IMadVRSettings"
• added support for h264 files with a 3-byte NAL length

Förändringar v0.71 -> v0.73

• fixed (again): video playback in PotPlayer froze in various situations
• fixed: OSD changes could result in dropped frames (reverted to older code)
• fixed: crash if the source filter reported a NULL file name

Förändringar v0.70 -> v0.71

• for DVD playback start, "delay playback start..." option is now auto disabled
• when OSD changes, render queue is cut down to 3/8 to make OSD more responsive
• when madVR pauses/starts/stops graph, notification message 0xFA17 is sent now
• fixed: crash with NVidia PureVideo MPEG2 Decoder
• fixed: crash with h264 AVI content
• fixed: unpause delay with internal decoders in exclusive mode
• fixed: subtitles disappeared when pausing playback
• fixed: madVR caused "File Source Async" to never be destroyed
• fixed: full range YCbCr input showed a green tint (introduced with v0.70)

Förändringar v0.65 -> v0.66

• rewritten large parts of the OSD logic
• added APIs for media player devs to draw their OSDs/GUIs in exclusive mode
• added API for media player devs to disable the madVR seekbar
• fixed: OSD is now above subtitles instead of under
• OSD + seekbar are now drawn to full window size, not to video rect, anymore
• madVR debug OSD is now white with a dark background
• using higher internal precision for internal calculations now
• fixed a couple of bug in gamma / gamut / 3dlut processing
• instead of yRGB, madVR/yCMS are now using the measured display primaries
• improved compatability with uncompressed video files
• fixed: avisynth -> ffdshow -> RGB -> madVR produced upside down image
• fixed: seekbar showed up when playback monitor was positioned "under" primary
• simplified calibration settings a bit more

Förändringar v0.63 -> v0.65

• added display "properties", "calibration" and "color & gamma" settings pages
• added option to define the native display bitdepth (affects dither strength)
• added options to define how the display was calibrated (gamut + gamma)
• moved "Video/PC levels" option to display "properties" settings page
• added options to define which gamma / transfer function to use
• replaced old "use 3dlut" option with new controls on "calibration" page
• added integrated GUI for yCMS 3dlut creation, no more console hacking needed
• added "please wait" dialog while yCMS is downloaded + installed
• added "please wait" dialog while 3dlut file is created
• added support for 6 and 7 bit 3dlut files (see trade quality for performance)
• added option to choose a manually created external 3dlut file (per display)
• there's only one 3dlut file per display now
• 3dlut is now always yRGB / RGB_Video input and RGB_Video output
• YCbCr -> RGB conversion is now always done by shader math, not by 3dlut
• Video/PC levels conversion is now always done by shader math, not by 3dlut
• rewritten rendering and pixel shader chain
• subsampled YCbCr is now upsampled & converted to RGB first, then scaled
• chroma upsampling got quite a bit faster (because it's now always exactly 2x)
• luma scaling got a tiny bit faster, depending on scaling factor and taps
• Ctrl+Alt+Shift+G displays and increases the Gamma value (2.20 -> 2.25 -> ...)
• Ctrl+Alt+Shift+F displays and decreases the Gamma value (2.20 -> 2.15 -> ...)
• dither is using a texture again instead of shader math
• dither is now colored and differs for every video frame
• added support for 8 bit 4:2:0 media types IYUV, I420, NV21, ICM*
• added support for 8 bit 4:2:2 media types YUY2, YVYU, UYVY, YV16, yuv2, ...
• added support for 8 bit 4:4:4 media types AYUV, YV24, I444, v308, v408
• added support for 8 bit RGB media types RGB32, RGB24, BGRA, ABGR, RGBA
• added support for 10 bit 4:2:2 media types P210, Y210, v210
• added support for 10 bit 4:4:4 media types Y410, v410
• added support for 16 bit 4:2:2 media types P216, Y216, v216
• added support for 16 bit 4:4:4 media types Y416, v416
• added support for 16 bit RGB media types RGB48, RGB64, b48r, b64a, ...
• added hints to "install.bat" and "readme.txt" to not delete the madVR folder
• fixed: madVR rendering window in GraphEdit didn't have correct size
• changed VSync priority back to "time critical"
• slightly changed tray icon mouse click behaviour
• fixed: couple of bugs in the display mode changer
• added new "enable gamma processing" option (default = off)
• Ctrl+Alt+Shift+C toggles gamma curve type
• Ctrl+Alt+Shift+M toggles decoding matrix
• Ctrl+Alt+Shift+P toggles source primaries
• added support for switching to 59i/60i display mode for 59p/60p content
• Windows key now only stops exclusive mode when running on primary monitor
• seekbar is now shown only if mouse cursor is on playback monitor
• when the PC is locked (Windows Key + L) madVR now pauses playback
• fixed: D3D11 playback on secondary monitor could result in window size bug

Förändringar v0.62 -> v0.63

• added display "properties", "calibration" and "color & gamma" settings pages
• added option to define the native display bitdepth (affects dither strength)
• added options to define how the display was calibrated (gamut + gamma)
• moved "Video/PC levels" option to display "properties" settings page
• added options to define which gamma / transfer function to use
• replaced old "use 3dlut" option with new controls on "calibration" page
• added integrated GUI for yCMS 3dlut creation, no more console hacking needed
• added "please wait" dialog while yCMS is downloaded + installed
• added "please wait" dialog while 3dlut file is created
• added support for 6 and 7 bit 3dlut files (see trade quality for performance)
• added option to choose a manually created external 3dlut file (per display)
• there's only one 3dlut file per display now
• 3dlut is now always yRGB / RGB_Video input and RGB_Video output
• YCbCr -> RGB conversion is now always done by shader math, not by 3dlut
• Video/PC levels conversion is now always done by shader math, not by 3dlut
• rewritten rendering and pixel shader chain
• subsampled YCbCr is now upsampled & converted to RGB first, then scaled
• chroma upsampling got quite a bit faster (because it's now always exactly 2x)
• luma scaling got a tiny bit faster, depending on scaling factor and taps
• Ctrl+Alt+Shift+C displays & toggles color format (BT.709 -> BT.601 -> PAL)
• Ctrl+Alt+Shift+G displays and increases the Gamma value (2.20 -> 2.25 -> ...)
• Ctrl+Alt+Shift+F displays and decreases the Gamma value (2.20 -> 2.15 -> ...)
• Ctrl+Alt+Shift+T displays and changes the Gamma curve type (pure power / BT)
• dither is using a texture again instead of shader math
• dither is now colored and differs for every video frame
• added support for 8 bit 4:2:0 media types IYUV, I420, NV21, ICM*
• added support for 8 bit 4:2:2 media types YUY2, YVYU, UYVY, YV16, yuv2, ...
• added support for 8 bit 4:4:4 media types AYUV, YV24, I444, v308, v408
• added support for 8 bit RGB media types RGB32, RGB24, BGRA, ABGR, RGBA
• added support for 10 bit 4:2:2 media types P210, Y210, v210
• added support for 10 bit 4:4:4 media types Y410, v410
• added support for 16 bit 4:2:2 media types P216, Y216, v216
• added support for 16 bit 4:4:4 media types Y416, v416
• added support for 16 bit RGB media types RGB48, RGB64, b48r, b64a, ...
• added hints to "install.bat" and "readme.txt" to not delete the madVR folder
• fixed: madVR rendering window in GraphEdit didn't have correct size
• changed VSync priority back to "time critical"
• slightly changed tray icon mouse click behaviour
• fixed: couple of bugs in the display mode changer
• added new "enable gamma processing" option (default = off)

Förändringar v0.61 -> v0.62

• added display "properties", "calibration" and "color & gamma" settings pages
• added option to define the native display bitdepth (affects dither strength)
• added options to define how the display was calibrated (gamut + gamma)
• moved "Video/PC levels" option to display "properties" settings page
• added options to define which gamma / transfer function to use
• replaced old "use 3dlut" option with new controls on "calibration" page
• added integrated GUI for yCMS 3dlut creation, no more console hacking needed
• added "please wait" dialog while yCMS is downloaded + installed
• added "please wait" dialog while 3dlut file is created
• added support for 6 and 7 bit 3dlut files (see trade quality for performance)
• added option to choose a manually created external 3dlut file (per display)
• there's only one 3dlut file per display now
• 3dlut is now always yRGB / RGB_Video input and RGB_Video output
• YCbCr -> RGB conversion is now always done by shader math, not by 3dlut
• Video/PC levels conversion is now always done by shader math, not by 3dlut
• rewritten rendering and pixel shader chain
• subsampled YCbCr is now upsampled & converted to RGB first, then scaled
• chroma upsampling got quite a bit faster (because it's now always exactly 2x)
• luma scaling got a tiny bit faster, depending on scaling factor and taps
• Strg+Alt+Shift+C displays & toggles color format (BT.709 -> BT.601 -> PAL)
• Strg+Alt+Shift+G displays and increases the Gamma value (2.20 -> 2.25 -> ...)
• Strg+Alt+Shift+F displays and decreases the Gamma value (2.20 -> 2.15 -> ...)
• Strg+Alt+Shift+T displays and changes the Gamma curve type (pure power / BT)
• dither is using a texture again instead of shader math
• dither is now colored and differs for every video frame
• added support for 8 bit 4:2:0 media types IYUV, I420, NV21, ICM*
• added support for 8 bit 4:2:2 media types YUY2, YVYU, UYVY, YV16, yuv2, ...
• added support for 8 bit 4:4:4 media types AYUV, YV24, I444, v308, v408
• added support for 8 bit RGB media types RGB32, RGB24, BGRA, ABGR, RGBA
• added support for 10 bit 4:2:2 media types P210, Y210, v210
• added support for 10 bit 4:4:4 media types Y410, v410
• added support for 16 bit 4:2:2 media types P216, Y216, v216
• added support for 16 bit 4:4:4 media types Y416, v416
• added support for 16 bit RGB media types RGB48, RGB64, b48r, b64a, ...
• added hints to "install.bat" and "readme.txt" to not delete the madVR folder
• fixed: madVR rendering window in GraphEdit didn't have correct size
• changed VSync priority back to "time critical"
• slightly changed tray icon mouse click behaviour

<<Tillbaka