Versionshistoria NAS4Free (32-bit embedded)

<<Tillbaka

Förändringar v10.1.0.2.1454 Beta -> v10.1.0.2.1557 Beta

• Changes:
• Upgrade to FreeBSD 10.1 RELEASE p10.
• Add Home, Insert, Delete, End, Page Up/Down, ctrl left/right keys to console.
• Add Daap/Firefly advanced options.
• Add aio_pthread streams_xattr acl_xattr.
• Add zfsacl default setting.
• Add inherit acls on SMB share.
• Increase upload size in Webserver service up to 16GiB. (websrv_maxrequestsize)
• Support aclinherit/aclmode ZFS properties.
• Use crypt password instead of md5 value.
• Upgrade tzdata to 2015d.
• Upgrade mDNSResponder to 567.
• Upgrade msmtp to 1.6.2.
• Upgrade tmux to 2.0.
• Upgrade php to 5.6.9.
• Upgrade bash 4.3 to patch 39.
• Upgrade samba to 4.1.18.
• Upgrade nut to 2.7.3.
• Upgrade jQuery to 1.11.3.
• Fixes:
• AFP share is not shown in Time Machine.
• Translation to filechooser.
• missing translation in OPT/LAN interface.
• broken extension menu in filemanager.
• AFP share is not shown in Time Machine.
• missing libftdi in lcdproc.

Förändringar v9.3.0.2.1391 -> v10.1.0.2.1454 Beta

• Changes:
• Upgrade to FreeBSD 10.1 RELEASE p9.
• Add Home, Insert, Delete, End, Page Up/Down keys to shell.
• Upgrade php to 5.6.8.
• Upgrade tzdata to 2015d.
• Upgrade mDNSResponder to 567.
• Upgrade msmtp to 1.6.2.
• Fixes:
• AFP share is not shown in Time Machine.

Förändringar v9.3.0.2.1480 -> v9.3.0.2.1556

• Changes:
• Upgrade to FreeBSD 9.3 RELEASE p14.
• Upgrade to Samba4.1 and add SMB3 in WebGUI.
• Convert to pkgng.
• Ability to backup and restore the encrypted configuration.
• Installation of system with GPT partition. (experimental)
• Improved WebGUI under PHP 5.6.
• Improved WebGUI with Chrome.
• Improved config restore verbose output.
• Improved ZFS pool usage/tool and import ZFS disks.
• Improved ZFS pool import on embedded.
• Improved HAST switch with net.inet.carp.preempt.
• Improved PHP session handle.
• Improved swap setting.
• Replaced /dev/md0 with xmd using LZ4 compression.
• Replaced the server certificate with 2048bits key and sha256 signature.
• Change iperf2.x for iperf3.
• Changed samba reload when changing the shares. (it takes few secs.)
• Changed rootfs layout. (2GB USB/CF is required. Full is 4GB or more.)
• Changed image files to use XZ.
• Changed net.inet.tcp.delayed_ack to 1.
• Changed boot with advskew=240 on master node. ("Switch VIP to MASTER" button will change the value)
• Changed default Map to guest in CIFS/SMB is enabled.
• Changed SMB send/recv buffer to 128480.
• Drop SSLv3 support. (HTTPS must use TLS)
• Drop LiveCD mode support with less than 2GB memory. (install/upgrade only). Supported minimum spec except LiveCD is 512MB memory + 512MB swap device or partition. 1024MB swap device or partition is recommended. File based swap and ZFS volume swap is not recommended.
• Add ext2/ext3/ext4 detection when importing disk.
• Add NFS v4 support.
• Add tcpdump.
• Add hostapd support. (wireless AP mode)
• Add WLAN virtual interface used for wireless device. (OPT only at this time)
• Add WebGUI access restriction.
• Add NFS support in HAST service.
• Add default swap of 512MB for LiveUSB and before user configuration.
• Adjust number of Status|Processes.
• Add MBR partition to LiveUSB.
• Add log/mirrored log support in Disks|ZFS|Pools|Tools.
• Add expires HTTP header. (some js must be force reloaded.)
• Add 10.1 bge driver & NAS4Free bge wol patch.
• Increase http upload size to 512MB.
• Remove last slash of the path added by filechooser.
• Add wait_on and spindown.
• Upgrade e2fsprogs to 1.42.12.
• Upgrade transmission to 2.84.
• Upgrade isboot to 0.2.8.
• Upgrade istgt to 20141125.
• Upgrade smartmontools 6.3
• Upgrade xmlstarlet to 1.6.1.
• Upgrade mDNSResponder to 561.1.1.
• Upgrade xmd to 0.4.4.
• Upgrade bash 4.3 to patch 33.
• Upgrade unison to 2.48.3.
• Upgrade netatalk to 3.1.7.
• Upgrade iperf3 to 3.0.11.
• Upgrade inadyn-mt to 02.24.44.
• Upgrade samba to 4.1.17.
• Upgrade sipcalc to 1.1.6.
• Upgrade nano to 2.4.1.
• Upgrade rsync to 3.1.1.
• Upgrade tzdata to 2015d.
• Upgrade mDNSResponder to 567.
• Upgrade msmtp to 1.6.2.
• Upgrade php to 5.6.8.
• Fixes:
• Newly created AFP share is not shown in Time Machine.
• Pool state on index.php is not a live state.
• Can not mount(readonly) ext2/ext3/ext4 on GPT.
• Remove ZFS pool cache in ZFS pool tools and sync.
• FAT/NTFS mount does not use access restriction.
• Broken Wireless support.
• ZFS pool cache is not removed when deleting or reseting to factory default.
• Missing /etc/uams/uams_randnum.so
• Missing nutdrv_atcl_usb nut driver.
• Never reject SMB3 and sendfile combination.
• Failed to mount NTFS with read-only.
• Missing mount_fusefs in /usr/local/sbin.
• Missing usb device configuration file.
• Missing default pkg repository.
• mount_ntfs is not installed to /sbin.
• Wrong variable in HAST script.
• /boot/kernel/fuse.ko is missing.
• /etc/platform is broken on full installation.
• Some DHCP setting of WebGUI does not work.
• xmlrpc is broken.
• Missing GPT partition in Disks|ZFS|Pools|Tools.
• Switching DHCP and static IP cause unexpected behavior.
• Some drives can't get disk model/description.
• The text on graph is not sized on Chrome.
• Firmware page show incorrectly.
• ntfs-3g is broken.
• Form size is too small on Chrome.
• HAST device is not imported by import disks.
• Stop flooding "Unknown USB device" to syslog.

Förändringar v9.3.0.2.1391 -> v9.3.0.2.1480

• Changes:
• Upgrade to FreeBSD 9.3 RELEASE p13.
• Upgrade to Samba4.1 and add SMB3 in WebGUI.
• Convert to pkgng.
• Ability to backup and restore the encrypted configuration.
• Installation of system with GPT partition. (experimental)
• Improved WebGUI under PHP 5.6.
• Improved WebGUI with Chrome.
• Improved config restore verbose output.
• Improved ZFS pool usage/tool and import ZFS disks.
• Improved ZFS pool import on embedded.
• Improved HAST switch with net.inet.carp.preempt.
• Improved PHP session handle.
• Improved swap setting.
• Replaced /dev/md0 with xmd using LZ4 compression.
• Replaced the server certificate with 2048bits key and sha256 signature.
• Change iperf2.x for iperf3.
• Changed samba reload when changing the shares. (it takes few secs.)
• Changed rootfs layout. (2GB USB/CF is required. Full is 4GB or more.)
• Changed image files to use XZ.
• Changed net.inet.tcp.delayed_ack to 1.
• Changed boot with advskew=240 on master node. ("Switch VIP to MASTER" button will change the value)
• Changed default Map to guest in CIFS/SMB is enabled.
• Changed SMB send/recv buffer to 128480.
• Drop SSLv3 support. (HTTPS must use TLS)
• Drop LiveCD mode support with less than 2GB memory. (install/upgrade only)
• Supported minimum spec except LiveCD is 512MB memory + 512MB swap device or partition.
• 1024MB swap device or partition is recommended.
• File based swap and ZFS volume swap is not recommended.
• Add ext2/ext3/ext4 detection when importing disk.
• Add NFS v4 support.
• Add tcpdump.
• Add hostapd support. (wireless AP mode)
• Add WLAN virtual interface used for wireless device. (OPT only at this time)
• Add WebGUI access restriction.
• Add NFS support in HAST service.
• Add default swap of 512MB for LiveUSB and before user configuration.
• Adjust number of Status|Processes.
• Add MBR partition to LiveUSB.
• Add log/mirrored log support in Disks|ZFS|Pools|Tools.
• Add expires HTTP header. (some js must be force reloaded.)
• Add 10.1 bge driver & NAS4Free bge wol patch.
• Increase http upload size to 512MB.
• Remove last slash of the path added by filechooser.
• Add wait_on and spindown.
• Upgrade e2fsprogs to 1.42.12.
• Upgrade transmission to 2.84.
• Upgrade isboot to 0.2.8.
• Upgrade istgt to 20141125.
• Upgrade smartmontools 6.3
• Upgrade xmlstarlet to 1.6.1.
• Upgrade mDNSResponder to 561.1.1.
• Upgrade xmd to 0.4.4.
• Upgrade bash 4.3 to patch 33.
• Upgrade unison to 2.48.3.
• Upgrade netatalk to 3.1.7.
• Upgrade iperf3 to 3.0.11.
• Upgrade inadyn-mt to 02.24.44.
• Upgrade samba to 4.1.17.
• Upgrade sipcalc to 1.1.6.
• Upgrade nano to 2.4.1.
• Upgrade rsync to 3.1.1.
• Upgrade php to 5.6.8.
• Upgrade tzdata to 2015d.
• Upgrade mDNSResponder to 567.
• Upgrade msmtp to 1.6.2.
• Fixes:
• Newly created AFP share is not shown in Time Machine.
• Pool state on index.php is not a live state.
• Can not mount(readonly) ext2/ext3/ext4 on GPT.
• Remove ZFS pool cache in ZFS pool tools and sync.
• FAT/NTFS mount does not use access restriction.
• Broken Wireless support.
• ZFS pool cache is not removed when deleting or reseting to factory default.
• Missing /etc/uams/uams_randnum.so
• Missing nutdrv_atcl_usb nut driver.
• Never reject SMB3 and sendfile combination.
• Failed to mount NTFS with read-only.
• Missing mount_fusefs in /usr/local/sbin.
• Missing usb device configuration file.
• Missing default pkg repository.
• mount_ntfs is not installed to /sbin.
• Wrong variable in HAST script.
• /boot/kernel/fuse.ko is missing.
• /etc/platform is broken on full installation.
• Some DHCP setting of WebGUI does not work.
• xmlrpc is broken.
• Missing GPT partition in Disks|ZFS|Pools|Tools.
• Switching DHCP and static IP cause unexpected behavior.
• Some drives can't get disk model/description.
• The text on graph is not sized on Chrome.
• Firmware page show incorrectly.
• ntfs-3g is broken.
• Form size is too small on Chrome.
• HAST device is not imported by import disks.
• Stop flooding "Unknown USB device" to syslog.

Förändringar v9.3.0.2.1349 -> v9.3.0.2.1391

• Changes:
• Upgrade to FreeBSD 9.3 RELEASE p13.
• Upgrade to Samba4.1.x now supports SMB3 in WebGUI.
• Convert to pkgng.
• Ability to backup and restore the encrypted configuration.
• Installation of system with GPT partition. (experimental)
• Improved WebGUI under PHP 5.6.
• Improved WebGUI with Chrome.
• Improved config restore verbose output.
• Improved ZFS pool usage/tool and import ZFS disks.
• Improved ZFS pool import on embedded.
• Improved HAST switch with net.inet.carp.preempt.
• Improved PHP session handle.
• Improved swap setting.
• Replaced /dev/md0 with xmd using LZ4 compression.
• Replaced the server certificate with 2048bits key and sha256 signature.
• Change iperf2.x for iperf3. (iperf commands changed! now use iperf3 command)
• Changed samba reload when changing the shares. (it takes few secs.)
• Changed rootfs layout. (2GB USB/CF is required. Full is 4GB or more.)
• Changed image files to use XZ.
• Drop SSLv3 support. (HTTPS must use TLS)
• Drop LiveCD mode support with less than 2GB memory. (install/upgrade only). Supported minimum spec except LiveCD is 512MB memory + 512MB swap device or partition. 1024MB swap device or partition is recommended. File based swap and ZFS volume swap is not recommended.
• Add ext2/ext3/ext4 detection when importing disk.
• Add NFS v4 support.
• Add tcpdump.
• Add hostapd support. (wireless AP mode)
• Add WLAN virtual interface used for wireless device. (OPT only at this time)
• Add WebGUI access restriction.
• Add NFS support in HAST service.
• Add default swap of 512MB for LiveUSB and before user configuration.
• Adjust number of Status|Processes.
• Add MBR partition to LiveUSB.
• Add log/mirrored log support in Disks|ZFS|Pools|Tools.
• Add expires HTTP header. (some js must be force reloaded.)
• Add 10.1 bge driver & NAS4Free bge wol patch.
• Increase http upload size to 512MB.
• Remove last slash of the path added by filechooser.
• Add wait_on and spindown.
• Upgrade e2fsprogs to 1.42.12.
• Upgrade transmission to 2.84.
• Upgrade isboot to 0.2.8.
• Upgrade istgt to 20141125.
• Upgrade smartmontools 6.3
• Upgrade xmlstarlet to 1.6.1.
• Upgrade mDNSResponder to 561.1.1.
• Upgrade xmd to 0.4.2.
• Upgrade bash 4.3 to patch 33.
• Upgrade unison to 2.48.3.
• Upgrade netatalk to 3.1.7.
• Upgrade iperf3 to 3.0.11.
• Upgrade samba to 4.1.17.
• Upgrade zoneinfo to 2015b.
• Upgrade php to 5.6.7.
• Upgrade nano to 2.4.0.
• Fixes:
• Can not mount(readonly) ext2/ext3/ext4 on GPT.
• Remove ZFS pool cache in ZFS pool tools and sync.
• FAT/NTFS mount does not use access restriction.
• Broken Wireless support.
• ZFS pool cache is not removed when deleting or reseting to factory default.
• Missing /etc/uams/uams_randnum.so
• Missing nutdrv_atcl_usb nut driver.
• Never reject SMB3 and sendfile combination.
• Failed to mount NTFS with read-only.
• Missing mount_fusefs in /usr/local/sbin.
• Missing usb device configuration file.
• Missing default pkg repository.
• mount_ntfs is not installed to /sbin.
• Wrong variable in HAST script.
• /boot/kernel/fuse.ko is missing.
• /etc/platform is broken on full installation.
• Some DHCP setting of WebGUI does not work.
• xmlrpc is broken.
• Missing GPT partition in Disks|ZFS|Pools|Tools.
• Switching DHCP and static IP cause unexpected behavior.
• Some drives can't get disk model/description.
• The text on graph is not sized on Chrome.
• Firmware page show incorrectly.
• ntfs-3g is broken.
• Form size is too small on Chrome.
• HAST device is not imported by import disks.
• Stop flooding "Unknown USB device" to syslog.

<<Tillbaka