Versionshistoria SmartDVB

<<Tillbaka

Förändringar v0.4.0 Beta 2 -> v0.4.0 RC

• added: timeout message for scheduled action start (30 seconds default value) added to schedule settings dialog.
• modified: record all audio PID’s for transport stream recordings moved to record settings dialog and should now also be used for normal manual recordings (previously it only worked for scheduled recordings).
• added: chroma subsampling (4:2:0, 4:2:2 etc) to the additional video status, needs testing.
• modified: pressing the ‘play’/’pause’ keys now toggles play/paused state, previously it would remain at the chosen state.
• fixed: timeshift pause did not work correctly (introduced bug). Some modifcations to timeshift code with regards to this.
• modified: some addons interface calls modified (DoDiseqc doesn’t require the full channel data but instead uses the transponder and satellite structures, which is more appropriate not all channel data is needed by this call, this might break existing addons, but since there aren’t many yet i figured it wouldn’t be much of a problem. If you have build an addon you’ll need to rebuild with the current addon example headers to be sure)
• modified: some setup changes. If you had undefined problems with upgrades previously please try again.
• improved: osd timeshift button states (ff/play/pause didn’t always update button state correctly).
• added: end time to add schedule task dialog (by requests).
• improved: smartosd transparency slider settings is more verbose now (seemed unclear to some)
• added: EIT event description on the main epg pane is now also shown in the edit field.
• modified: by default dvb-t offset settings are not used (too many users seem to have issues with this). Added an option to the scanner dialog to specifically enable offset addition to the currently scanned dvb-t frequency.
• improved: EPG ampersand “&” would be incorrectly translated to underscore at some places.
• added: blindscanner option to disable retries when no data is received.
• added: option to diseqc settings to not show ‘positioner moving …’ message when moving a positioner/rotor.
• fixed: scanner bugfix where MIS values would not be shown correctly with a sort selected/active.
• improved: some modifications to blindscan.dev to enable it to tune dvb-t/c (dvb-t tested).
• fixed: bug which could occasionally cause a crash when using the diseqc console.
• added: basic RF scanner. Only works with streamreader.dll supported devices so don’t try this otherwise won’t work.
• Might be removed for final version if it causes too many issues. Added for testing/feedback.
• updated: streamreader.dll to current 1.2.0.1202 version.

Förändringar v0.4.0 Beta 1 -> v0.4.0 Beta 2

• added: smartexec /channel option saves currently selected channel (satid,nid,tid,sid) to channel.dat in the settings folder.
• fixed: lag issue which could occur with skystar devices (skystar.dev).
• fixed: bda.dev crash which could occur when switching to/from direct tune mode.
• fixed: skystar HD Express should now also work with skystar WDM device (skystar.dev), should be a better option for owners of such devices compared to the buggy bda implementation technisat provides.
• fixed: transcode parameters were not saved correct/used at the transcode settings dialog.
• fixed: video status bar would not update EPG progress/textual data correctly at all times, should work better now.
• fixed: skystar.dev signal stats were not being shown correct (quality/level were shown as being the same).
• fixed: edit filter should be maintained between channel tab switches.
• added: HTTP stream option to stream radio station with MP3. (TV stations should also send the audio only through this http url).
• added: basic transcode profile settings to allow for easier change/selected of different streaming/recording parameter sets. Seemed like a necessity to add this to the current external ffmpeg transcode setup. Profiles are saved to settings/transcode.ini
• fixed: scan update dialog lost channels are now sorted by frequency.
• fixed: some issues with transport stream transcoded recordings (mp4/mkv).
• added: remote ch# selection should also move epg to the selected remote tab channel.
• fixed: channel list tv filter would not be retained across application instances.
• fixed: adding a blindscan range now uses correct c-band defaults
• fixed: client mode now also takes extra buffering into account when receiving streams (if set it’s used for client side receive buffering).
• fixed: some transcode profile interface inconsistencies.
• added: ability to hide video status (main menu > view)
• added: optional extra video status line showing video/audio type and simple record progress.
• added: video process to connection settings dialog. This allows you to enter a filter like for example ‘ffdshow raw filter’ to process video.
• added: alternate video decoder, based on name selection for now, if you have other suggestions please let me know. You can use this to for example select a different decoder for HD compared to H.264 (by entering a name like ‘ HD’ or alike).
• added: seperate h.264 ffmpeg record transcode command lines. So you’re able to differentiate between then when recording, on slower systems you H264 transcoding speed is increased by using preset -superfast where possible. This might decrease recording quality in such cases though, remove it again if you don’t have issues with the efficiency of these transcoding on your system. Please note that slower systems might simply have problems automagically transcoding some recording types, if you’re system simply isn’t efficient enough for ffmpeg to transcode in real-time this might be unsolvable besides a quicker cpu.
• fixed: HTTP streaming seemed to fail on some XP systems, added HTTP option to optimize http streaming which might allow such XP systems to stream correctly when enabled.
• modified: HTTP internal caching reworked somewhat to try to make it more stable under various network conditions.
• added: renderless video renderer.
• modified: some changes to bdas.dev due to reports, some people seem to have some weird exceptions there sometimes. If you experience worse/sluggish video or lockups at exit please let me know, i might need to revert these changes if it’s not for the better.
• added: option to schedule task exit to close the dvb device (experimental might be unstable, /STOPDEV parameter added to smartexec.exe for this purpose).
• fixed: some problems with audio process filter being added twice under some settings situations.
• fixed: some additional bug report fixes/modifications.
• added: basic initial HEVC support. Current known codecs which support HEVC are lentoid/LAV/latest cyberlink. Please note that some of these codecs are still quite unstable and could result in application exceptions related to these codecs. HEVC is not implemented for PIP atm (seemed like overkill with just 2-4 available and unstable satellite HEVC streams)
• fixed: main app status bar did not remain hidden if so requested on restart.

Förändringar v0.3.5 Release test -> v0.3.5

• fixed: smartosd channel list (floating/fullscreen) seemed broken.
• fixed: ms dtv-dvd video should connect better now (some other codecs like ffdshow might have less issues with no connection error messages sometimes too).

Förändringar v0.3.0 RC -> v0.3.0

• corrected: some graph timeshift issues.
• corrected: some issues with smartosd up/down remote/kb keys which did not navigate station list. Also 'ok' should now tune current selected station at those station lists.
• corrected: scanner sync update from satfeeds failed.

Förändringar v0.3.0 Beta 3 -> v0.3.0 RC

• corrected: issue with open db's at appdata folder path.
• corrected: scan issue when update stations.
• corrected: skystar issue with appdata path once more.
• corrected: some issue with wrong processed dvb subtitles at some stations.
• corrected: epg issue with north america (windowed epg would not show correct all the time).
• also left/right with smartosd station data now also moves through simple epg/stations, to
• preview mini osd station epg without tune with remote (enter should then tune station if so required etc).
• add: NA modulations (DSS QPSK)
• (Digicipher II Combo)
• (Digicipher II Split (I))
• (Digicipher II Split (Q))
• (Digicipher II Offset QPSK)
• to app, bda.dev implementation (should operate with genpix bda devices untested).
• add: persian iso support to epg (not tested)
• corrected: bda.dev BDA_MOD_32APSK modulation issue which probably didn't process this modulation correct (untested)
• add: www.smartdvb.net website hyperlink to about dialog.
• corrected: some exceptions/problems corrections.
• add: above mentioned NA modulations to blindscanner/blindscan.dev (untested).
• corrected: fastsatfinder syncs did not show 8psk modulations correct.
• corrected: possible issue with diseqc rotor console step east/west at seconds mode.
• corrected: again more corrected exceptions/issues due to reports i hope.
• done: some general app robustization.
• corrected: mpeg radio/audio records seemed broken, should operate again.
• done: upgraded report module to current one.
• add: keep display on to general settings (should override power save options which might turn display
• off while video available).
• corrected: dcII muxes process correction (video/radio PID's did not get detected correct like video/radio
• stations). No dss streams processing this might be enabled somehow at future.
• Note genpix.dev for now does not operate with dcII modulations, please use bda.dev (florian) which
• requires the genpix bda driver to be installed.
• add: new tsb interfaces to bda.dev (Florian). Tested with tbs5925 seems auto-detect code did not operate
• correct for this tbs device (please let me know if new tbs interfaces r ok for ur tbs device too only
• tested with tbs 5925 and commited switch).
• corrected: most new strings moved to resources to allow for translations. If you attempt a translation but still
• miss some localized strings please let me know.
• add: smartosd option to disable transparency, if you have cpu/video issues (especially with smartosd epg)
• try this option (at future release this might be made configurable per osd element).
• add: SmartOSD program nfo now also shown when main windowed epg clicked. Also click at screen/image while
• p/i visible should hide p/i.
• add: visibility option to smartosd settings to allow for hide/show of main/windowed popup osd elements.
• altered: send diseqc at each frequency alteration's now enabled by default.
• altered: bda.dev module at new install now select direct tune mode for prof7301, seems for some users
• default bda tune does not operate correct with this device, direct mode seems to operate better.
• add: simple anti-repeat to remote options.
• corrected: no-signal process should operate better now.

<<Tillbaka