Versionshistoria SpeedFan

<<Tillbaka

Förändringar v4.50 -> v4.51

• added full support for Fintek F71811U
• added full support for Nuvoton NCT6106D
• added full support for Nuvoton NCT6792D
• added full support for Fintek F71878A/F71868A
• added full support for ITE IT8783F
• added full support for Intel C610/X99 SMBus
• added full support for ITE IT8620E
• added support for Nuvoton NCT6683D
• fixed Fintek F71808A PWM MODE setting
• added PWM 4 ENABLE and PWM 5 ENABLE to advanced options for the ITE IT8620E to enable or disable PWM 4 and 5 writes
• smbus access is disabled for Sapphire PC-AM2RD790
• fixed fan speed readings on the NCT6791D
• SCSI Scan is automatically disabled if iastorA.sys driver is installed - use /DOSCSISCAN to force enable it
• fixed Fintek F71811U PWM TYPE advanced setting
• greatly improved RAM SPD decoding for SDRAM, DDR, DDR2, DDR2 FB-DIMM and DDR3
• improved identification of newer revisions of Microchip MCP9843 and MCP98243
• fixed STTS3000 and STTS2002 temperature reporting
• fixed old IT8705F identification
• events can now be triggered if something happens for, at least, up to 9999 times (it was 99)
• battery charge is now properly updated on the EXOTICS tab
• NCT6791D IO Space accessibility is now tested upon resume from suspend and fixed, if needed
• restored DIMM access on latest Intel chipsets
• added manifest to improve support up to Windows 10
• configuration dialog now always opens at the center of the main window

Förändringar v4.49 -> v4.50

• Added full support for Nuvoton NCT6791D (including fan control)
• Improved external (USB) hard disk detection (some were not properly detected on Windows 8)
• Added a new method to access hard disks connected to 3ware RAID controllers (works on 64 bit systems too)
• Added support for Intel core temperature (Family 06h Model 3Ch)
• Added support for Intel core temperature (Family 06h Model 3Eh)
• Added support for AMD Family 15h temperature
• Added support for AMD Family 16h temperature
• Added support for Intel 8 Series SMBus
• Added support for Intel 8 Series Mobile SMBus
• Added support for Intel 9 Series SMBus
• Added Nuvoton NCT6779D/NCT6791D advanced option to choose between PWM and DC output for System Fan (PWM 1)
• Changed the way NCT6779D and NCT6791D read fan speeds
• Added 4 more temperature readings to NCT6779D
• Added Fintek F71808A advanced setting: PWM TYPE 3
• Refined Fintek F71808A description for PWM MODEs
• Added preliminary support for ITE IT8620E temperatures and fan speeds
• Fixed a minor typo that caused Fintek F71808A to not show some temperatures properly

Förändringar v4.47 -> v4.49

• fixed a typo that caused ACPI temperatures to be reported wrongly on some Windows 7
• changed the name of the installer to improve compatibility with Windows 8

Förändringar v4.46 -> v4.47

• added support for hard disks through CSMI (Intel Matrix RAID and Intel Rapid Storage, for example)
• added support for Intel 7 Series SMBus
• added full support for NCT6779D
• added full support for Fintek F71808A
• fixed temperature reading for Intel Ivy Bridge
• fixed ATK0110 support on several motherboards
• switched to the new HddStatus service (it works on Unix/Linux too now)
• ARECA RAID support is not longer probed on Windows 2K
• limited DELL Studio 1558 support to the PWM alone for system stability
• added support for Seagate FreeAgentDesktop and FreeAgent USB enclosures
• added /NOINTELQST command line parameter
• TDELLSensor now handles resume from suspend

Förändringar v4.45 -> v4.46

• Improved DELL support. Restored nVidia I2C support. Improved ATI RADEON fan control. These just a few of the interesting improvements.

Förändringar v4.43 -> v4.44

• added full support for ATK0110
• added Advanced Fan Control including a graphical UI for configuration
• DELL support is now working on 64 bit systems too
• DELL support can change fan speeds, but if the BIOS is overriding it, there is little SpeedFan can do
• added support for ST STTS3000 and ST STTS2002 DIMM temperature sensors
• reported temperatures and fan speed on Sony Vaio VGN-FW21E
• fan speed is reported on some ASUS laptops with ATK0100 (like the F81Se and the K52JT)
• added preliminary identification of Fintek F71862
• PWM values can now be logged too
• temperatures are no longer tied to every fan speed as a default
• added F71809 PWM setting and reading
• improved SMART hard disk temperature reading if multiple attributes seem to report it
• rebuilt ARECA DLL with latest library and improved Areca RAID support
• more aggressive behaviour setting PWMs (this might help on systems where something else tries to change them)

Förändringar v4.42 -> v4.43

• restored full nVidia video card support
• hard disk finding now uses more stringent rules that lead to a much faster program startup
• fixed configuration issues with multiple nVidia video cards on the same system
• greatly improved User Interface responsiveness
• administrator privileges are now required and enforced to run SpeedFan
• added full support for Nuvoton W83627DHG-P, including PWM control
• added full support for Nuvoton NCT6776F, including PWM control
• added full support for Fintek F71808E, including PWM control
• added full support for Fintek F71809, including PWM control
• added full support for ITE IT8728F, including PWM control
• added full support for EMC2113, including PWM control
• added full support for Nuvoton W83L771
• added full PWM control for ITE IT8721F
• added support for several JEDEC JC 42.4 compliant sensors
• fully verified ITE IT8721F fan reading and control
• improved support for ACPI Thermal Zone temperatures reporting
• fixed Nuvoton W83667HG PWM MODE advanced settings
• fixed Nuvoton W83667HG-B PWM MODE advanced settings
• fixed Nuvoton W83677HG-I PWM reading
• fixed Winbond W83791D and Winbond W83792D TEMP2 and TEMP3 readings
• fixed Nuvoton W83627DHG, W83627EHF and W83667HG PWM TYPE settings
• fixed ITE IT8728F H/M identification
• fixed ITE IT8728F advanced properties support
• fixed ITE IT8720F PWM control
• fixed PWM readings for fans 4 and 5 on some ITE IT8712F
• added support for 3 additional temperature readings for Nuvoton W83677HG-I
• added support for Vtt voltage reading on ADT7490
• added Fintek F71858 support for fans, PWMs and advanced options
• improved detection of AD7417 to avoid false identifications
• Intel Core temperature are now properly read for 2nd Generation Intel Core Processor Family (Sandy Bridge)
• TIntelCoreSensor avoids reading temperatures from threads resulting from Hyper-Threading
• fixed temperature reporting on some hard disks that do not expose the usual SMART attribute
• added identification of Fintek F71869F
• added preliminary identification of ITE IT8772F
• added preliminary detection of Asus A8000B
• fixed a bug that prevented access to the SMBus on some ATI southbridges
• voltage scans are no longer automatically enabled for several ITE chips
• added preliminary identification for Fintek F71859
• added identification of Fintek F71809 and Fintek F71859
• added full support for Intel 6 Series SMBus
• added Intel NM10 SMBus enabler
• added full support for Intel ICH10 82801JD/DO SMBus
• /NONVIDIAI2C command line parameter is properly honoured again
• fixed a nasty bug in Intel SMBus support routines that could lead to releasing SMBus ownership at the wrong time
• improved Intel SMBus routines
• added exact voltage readings for Intel DH61BE, DH61CR, DH61DL, DH61WW, DH67BL, DH67CL, DH67GD, DH67CF, DP67BA, DP67DE, DP67BG, DB65AL, DQ67EP, DQ67OW, DQ67SW, DX58OG
• improved voltage readings for Asus P8P67 DeLuxe, P8P67 and P8P67-M
• pre-built configuration support has been added
• pressing on the left of the tabs on the main form no longer closes the program

Förändringar v4.41 -> v4.42

• added full access to hardware monitor chips available on several nVidia video cards (enabled I2C writes to allow fan speed control too)
• improved Intel QST support
• Intel QST now checks first for 2.0, then falls back to 1.0, if needed
• added support for external USB drives using JMicron controllers
• fixed fan speed computation for several Analog Devices chips (ADM1027, ADT7463, ADT7475, ADT7476, ADT7468, ADT7473, ADT7490) when configured for non standard number of pulses per revolution
• MUTEXes used to synchronize with other tools while accessing buses are now defined Global
• fixed CPU usage bars size on the main window
• enabled SMBus access on ICH10 and ICH10R, if needed
• if SpeedFan service is unavailable, a message dialog is shown and the program stops running
• added scan exceptions for Asus P5N-T DELUXE and Intel DX58SO
• SEND REPORT now includes a list of ACPI devices found

Förändringar v4.40 -> v4.41

• Added full support for Intel 5 Series/3400 Series SMBus
• Added full support for Intel QST 2.x
• Added full support for fan control for Intel QST
• Added full support for Fintek F71889F
• Added full support for Fintek F71889ED
• Added full support for SB8x0 SMBus

Förändringar v4.39 -> v4.40

• improved identification of Winbond W83667HG
• W83667HG has its own support code now
• W83667HG PWM MODE settings now work properly and can be used to change fan speeds
• fixed a minor bug in temperature readings of EMCT03
• fully included data from TPWS002 Intel Document about Tjmax values
• added support for ADP3228 fan reading
• AdvSmart no longer links a drive if SMART data has bad checksums

Förändringar v4.37 -> v4.38

• Added full support for AMCC/3ware SMART readings
• Added full support for Intel QST
• Added full support for ADT7470
• Added full support for ADT7462
• Added full support for nVidia MCP79 SMBus
• Added full support for SiS968 SMBus

<<Tillbaka